Hi, Neale. I have just cut some components, and can get some numbers. Whilst cutting an outside profile (around 43mm sq), it's under by 0.3 in X, and 0.5 in Y. An inside profile (hole) of 4mm got me an actual of 3.7mm. Bugger.Feed is around 200mm/min, which with my spindle at 3300rpm seems fine through 3mm ply, cutting 1mm at a time. DOC?
I can live with it, but that's not the way to do it, I like everything to be spot on...I think I must be a bit anal...Pass the anorak
Cheers,