-
10-03-2014 #1
wanted
I need to fix my x axis as the ball nut it noisy
i have a bed consisting of 3 850mm long 250mm wide 40mm thick t-slot peices
with the screw and nut to suit 6.35 1/8 sticking out the end
i think the nut is knackered.
anyway I want to lengthen the bed IF I am taking it apart anyway if you see?
I am sure the screws are standard 16mm thick with a 5mm pitch.
the two bearing rails are i thinnk bosche or thk 38mm rails - don't need the bearings for this.
so if you happen to have say
3 bits of 1000 long 250 by 40mm t slot = isel
two 38mm rails 1000 long
a 1000mm long 16 by 5mm pitched isel screw and nut - screw pokes out an inch i think
basically all the bits to lengthen an isel fb2 from 850 to 1000 or 1200, then thats great
want good used.
can't afford new.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
WANTED: Isel router wanted
By j.c.freeman in forum Items WantedReplies: 0Last Post: 29-05-2014, 12:20 PM -
WANTED: 3 bits of 250 by 1220 by 40mm t-slot, 1220 16X5 threaded rod and isel ballscrew, plus
By nobby in forum Items WantedReplies: 1Last Post: 01-03-2014, 01:31 AM -
T-slot clamping accessories
By Neale in forum Tool & Tooling TechnologyReplies: 2Last Post: 16-02-2014, 07:48 PM -
New T-slot bed!
By jcb121 in forum General DiscussionReplies: 5Last Post: 17-07-2012, 07:36 PM -
is it possible to slot the edge on a cnc?
By wyndham in forum General DiscussionReplies: 2Last Post: 21-06-2011, 12:25 AM
Bookmarks