Threaded View
-
17-03-2014 #1
Hello everyone,
After working with CNC machining centres and grinders for most of my adult life I've decided to include my mid life crisis with work and build a home CNC.
Purchased the following from Ebay :-
Nema 34 1090oz motors, PSU's and drives
RM1605 1350mm X and Z, 300mm Z.
16mm linear bar rails and blocks
2.2kW water cooled spindle and VFD with ER20 toolholding.
Going to use 40mm box section for frame - going to get help from fitters in work who are excellent welders, so hoping to keep distortion to a minimum. Going for centre take off Y axis - single leadscrew, mounted underneath the table.
Kicking off tomorrow so will keep all posted on progress.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Truss Structures - in larger gantry router design
By CharlesJenkinson in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 10-02-2014, 09:56 PM -
BUILD LOG: Vertical fixed gantry. Design & build. (Steel/epoxy)
By Greeny in forum DIY Router Build LogsReplies: 8Last Post: 19-08-2013, 08:26 PM -
Truss style Gantry
By D.C. in forum Gantry/Router Machines & BuildingReplies: 28Last Post: 15-12-2012, 07:23 PM -
Gantry design advice please
By D-man in forum Gantry/Router Machines & BuildingReplies: 10Last Post: 07-11-2012, 04:17 PM -
Gantry design question
By D.C. in forum Gantry/Router Machines & BuildingReplies: 30Last Post: 10-10-2012, 09:11 AM
Bookmarks