Quote Originally Posted by chris161190 View Post
Has anybody got one of these machines yet? I know they are very new on the market but some first hand experience would be great rather than speculated opinion?
Your probably only going to get speculated opinion on this machine around here but how about some Experienced Speculated opinion.? YES-NO.!! . . Well I'm giving it all the same.

I wouldn't waste my money on this machine or those electronics because both will give nothing but problems and frustration. The results will be mediocre and progressively get worse as the newness wears off, which probably won't be long.!

I hear what your saying regards use but why bother if your not going to make full use of CNC capabilty's.? Also while at the moment without CNC experience your thinking you'll not have much call for it but I promise that when you realise just what can be done your needs will rise very sharply and then you'll really see the limitations of weak flimsy machine like this.!

There's really no way to do this on the cheap other than DIY build it and if you try the Kit route be warned you'll most likely come to regret it and very quickly with the flimsy varities out there.!

Not being Negative here I'm being realistic which as come thru experience helping others who have tried taking the cheap route only to regret it.!