Advise on building a CNC table

[T0rnado69]

clive S. i guess thats true.
erm i guess all and any advice is good.
for the size of table i want. what size frame would be ideal.
best place to get the steppers. and other electronics.
software ?

Eddy
i guess that would make it easy to fasten.
but the mess the plasma leaves when it cuts would
proberly mess it up, and i thought of another way to fasten the ply to the water table.

jazzycnc
a lot of reading tells me thats it best to have a water table with cnc plamas.. helps keep the metal cool and cuts down on the smoke etc.
changing it over to a router would be fairly easy.
take the torch mount off the gantry and fit the router mount on.
sking any slats that have dross on the top with a soft disc.
fix ply bed onto 4 or 6 tabs that are welded to the water table slats.
i understand that they proberly dont belong together.
but if it turns out they both dont work well together.
then i can leave it as just a plasma table and always look at making a router one.