Quote Originally Posted by longy View Post
Hi Peter forget those Chinese machines for what you want to do as you need a machine with a good dust extraction hood. I'm guessing your going to want to make the masters out of something like dental plaster so that's going to make lots of dust.

It might be a good idea to say were about your from in the UK so as members local to you might be able to help. As for the mould what about using latex as silicone is very expensive unless your going to make 1000's

Mike :)
Hi Mike thanks for the reply. I am in Northwich Cheshire. I will find some photos of the silicon rubber i will be using, but basically it will take a mould from anything, so i was thinking of using either mdf plywood or even plastic sheet for the routeing process.

put on photos asap.

peter