Hybrid View
-
24-03-2014 #1
Hi Mike thanks for the reply. I am in Northwich Cheshire. I will find some photos of the silicon rubber i will be using, but basically it will take a mould from anything, so i was thinking of using either mdf plywood or even plastic sheet for the routeing process.
put on photos asap.
peter
-
24-03-2014 #2
Hi Peter, I was using silicone moulds 30+yrs back when I had a precast concrete business and it was 10x's the cost of latex then but think the prices are better now. Personally I would go with the Dental plaster it's good as you can fill, sand and reshape as you wish and yes you can use silicone or latex for the moulds. The mdf would need a lot of finishing for mould masters, plastics that I don't know as I have yet to find out how good a finish a cnc will make on plastics.
Mike :)
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
Does anyone want to build me a cnc router?
By totally useless in forum Open Source Designs & PlansReplies: 25Last Post: 05-05-2014, 12:44 AM -
How Not To Build A Router
By Clive S in forum Gantry/Router Machines & BuildingReplies: 15Last Post: 17-11-2013, 10:09 AM -
BUILD LOG: CNC Router New Build
By PilotTom in forum DIY Router Build LogsReplies: 12Last Post: 25-05-2013, 03:49 PM -
BUILD LOG: My Router Build!
By andy0202 in forum DIY Router Build LogsReplies: 3Last Post: 31-01-2013, 08:51 AM -
BUILD LOG: A3 Router Build
By GTJim in forum DIY Router Build LogsReplies: 6Last Post: 17-02-2012, 12:53 PM
Bookmarks