Quote Originally Posted by lateAtNight View Post
Rhonmac-cnc.co.uk. I ordered on the 30th, so it’s taken a while but I've been assured they are on the way.


I’ve had 3 motors off him before, I think they took about 3-4 weeks to come and two phone calls later, the guy I spoke to did have problems with his leg and was in and out of hospital. I did get the motors however so you should get them, what’s the hold up with your order?

Quote Originally Posted by lateAtNight View Post
2) I've started putting all of the electronics into an old workstation tower of mine. Pci slots rather than have them go out the front of the tower. Panel mount ac power in and two out for coolant pump and spindle.


I’ve started doing something like the above myself, I’ll post up a build log for it in a sec and repost the link back here for you to look at. I’ve done a nice solution and job of it so far I think, I was going to save it till it was all done but I’ve seen a few posts here now with related things so it’s time to show. You may like to note how I did the AC in option.