scm tech 95l cnc machining centre User manual or parts lists

[anwar]

hi firetrappe thanks for the parts list manual i wonder if you or george have got hold of a user manual i have a smc tech 95 its been in a corner in the work shop since i got it (n yes ebay ),now i need to get it going but am completely new to cnc would be grateful for any help

[george uk]

yes i will dig it out for you mate, i saved all the manuals and parts lists that peope showed/supplied me.

I searvices mine, so let me know if you get stuck. Its a big machine to start with but not to hard.

Whats your intent for it.

[anwar]

yes i will dig it out for you mate, i saved all the manuals and parts lists that peope showed/supplied me.

I searvices mine, so let me know if you get stuck. Its a big machine to start with but not to hard.

Whats your intent for it.

im based up north in manchester was hoping to do kitchen units and bedroom furniture but at the moment can not get away from shopfitting. i have found the parts manual but still could do with a user manual

thanks for the reply

[george uk]

will do, i might have to scann it ( its big ), so i will do it friday or saturday.

Its ideal for kitchen and wardrobes. there are some special codes as part of the g-code, but nothing unusual. i think i have a copy of the setting disk and some other bits you will find usfull.

Tips

when servicing bearings and so, the parts manual does not always show you all clips and screws. I got stuck on the main X screw baring for a while. they are easy enough to service though

2. Take time to make sure you set the feet properly, so the the weight is spread over the full lenght ( stop any slight twist on long jobs ) even if you have had it stood for a while, true up the shape by adjusting the feet

final,,, saftey barriers and e-stops are a must on these type machines... they look fabulously dangerous whilst in operation. massive green iron comedy splatting type cnc machines

[anwar]

Thanks for all the help george are you based any where near me

[Clive S]

Thanks for all the help george are you based any where near me

If you mouse hover over the flag next to his name it indicates that he is in Grimsby So up the M62 about 108 miles ..Clive