. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 08-04-2014 #1
    swisscheese's Avatar
    Lives in Melbourne, Australia.
    swisscheese
    Last Activity: 16-05-2014 Has been a member for 9-10 years. Has a total post count of 41. Received thanks 4 times, giving thanks to others 4 times.
    Okay have just done a simple 'blob' of water outline curve which runs x and y plane. turned the outline of this blob into a dxf then code. then deleted g64. can now control g64 g61 P and Q parameters from mdi and no suprises, it all works well if set to G64P0Q0. A pattern is starting to emerge.It works well with radius commands but doesn't when a curve is made using lots of straight lines.
    Reply With Quote Reply With Quote
  2. 08-04-2014 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by swisscheese View Post
    A pattern is starting to emerge.It works well with radius commands but doesn't when a curve is made using lots of straight lines.
    Well that's pretty useless then because most Cam programs that output 3D code use line segments as they tend to work with STL files which can only be straight line segments.!

    Like Clive says maybe time to go speak to the Geeks.!!. . . . Good luck.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need to slow down a signal due to Safe Torque Off alarm
    By corkcnc in forum General Electronics
    Replies: 0
    Last Post: 04-06-2014, 11:35 PM
  2. how to smooth stl model, smooth curves out of straight lines
    By chris in forum DeskProto
    Replies: 4
    Last Post: 21-01-2014, 11:00 PM
  3. Help! Steppers losing steps and making a racket under slow feed..
    By fasteddy in forum Stepper & Servo Motors
    Replies: 23
    Last Post: 06-08-2011, 03:03 PM
  4. Forum Slow
    By pcstru in forum General Discussion
    Replies: 3
    Last Post: 27-01-2011, 03:54 PM
  5. stepper speed very slow
    By jonm in forum Stepper & Servo Motors
    Replies: 17
    Last Post: 02-11-2009, 12:39 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules