Kress Spindle upgrade to a 2kw

[m.marino]

What are you milling mostly? If milling metal alot you might want to look at the 3kw spindle even though it does not give you a bigger ER collet (cheap buggers a ER25 would be so much more useful) it does give you a rather good increase in torque at the lower end of things and certain metals prefer things a bit slower to get nice good chips to be produced. Just a suggestion. -Michael

[Metal pecker]

Hi Michael, I mostly use the machine for drilling holes and cutting 18mm melamine faced chipboard for kitchen cupboard construction but I would like it to be able to cut 40mm oak worktops and belfast sink cut-outs etc
Many thanks