Threaded View
-
08-04-2014 #2
Last Activity: 02-10-2024
Clive, it sounds like a neat and tidy solution, as an alternative you could have connected a pot to the 0-10v and analogue input. I did this with my pin router but used a 10 turn pot with a scale dial to get precise speed control, not that you actually need it to be so precise. It also means you can mount it remotely if required, such as on the front of a panel.
dial similar to these http://www.digikey.co.uk/product-sea...Q15-1t1-VQ16-cLast edited by EddyCurrent; 08-04-2014 at 09:40 PM.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Chinese 300W DC spindle - is the spindle shaft grounded?
By HankMcSpank in forum Spindles & Drive MotorsReplies: 44Last Post: 26-11-2016, 07:25 PM -
WANTED: 2.2 KW Chinese Spindle
By Chaz in forum Items WantedReplies: 2Last Post: 17-06-2013, 10:03 AM -
WANTED: Chinese 1.5kw spindle/vfd
By Philly in forum Items WantedReplies: 5Last Post: 10-02-2013, 11:44 AM -
WANTED: Spindle holder for 1.5kw Chinese spindle.
By jcb121 in forum Items WantedReplies: 19Last Post: 14-10-2011, 02:07 PM -
chinese spindle cooling
By johngoodrich in forum Tool & Tooling TechnologyReplies: 11Last Post: 03-08-2011, 11:19 AM
Bookmarks