Hi eddy. I will get some Gunk ( i presume thats the proper name )

on the electric side.

The main brain box ( electrics cabinet with the pc, vdf, servo drivers and controllers, has its own sets of inverters built in to get 5v 12v 240v and drive servoes and encoders and VDF ). Seporate to that box, is what looks like huge transformer or inverter. ( not statndard to the machine ). I may as well buy a genny to run the 3phaze than convert it. Its a hugh and heavy machine ( 4mt long, without the brain cabinet ). i doubt it would run on single phaze without a massive gearing system.

I suspect, that the place were i purchased the machine of, may have had 220v 3p as a supply and used the inverter to upp it to 380v 3p ( the machine standard ), but am not sure, i will take a picture tomorrow and post it up. I need to know so i can get the correct or best matched genny