My spindle quotes ( i think ) 5kw at 380v and 3.6kw 220v on the case, the motors on the saw and multi drill head both quote power at ranges from 220v to 400v on there cases. the servoes are .75kw.

Hi, I think that you will need a proper 3 ph supply to run your machine
.

do you think a genny will have problems running it. i wasnt sure, i was thinking a big genny, something like this maybe.

16 KVA Diesel Generator 3 Phase Lister ST3 Engine Stamford Alternator | eBay

but if i can offload the vac and compresser, i wander if i can used cheeper jenny ( used obviously )