First steel diy CNC router build

[JAZZCNC]

Like Jonathan, I thought that the Huanyang VFDs were wired to support single- or three-phase operation as that's how they are described in the manual. I just picked two terminals on mine and it works fine. But if they've changed this, or some of the current crop of Chinese VFDs don't match the usual Huanyang spec, or some are just not wired internally in accordance with the manual, then that's well worth knowing.

I've fitted 2 inside 5wks 1 x 1.5kw & 1 x 2.2Kw that have been like this and previous to these I've had possibly 3 others same. All but one came from Chai and I didn't ask for single phase only so don't know why.? Maybe they do both and when short of dual and knowing coming to UK provide single phase.? . . . . Can tell you the First one gave me that "Oh NO" sinking feeling.!.

[ivars211]

Hi again, been delayed lately, more or less everything works OK now. Question is, how do you get X-axis right angled in respect to Y? I cannot figure out the most precise method of doing it, any suggestions?

And also, I cannot find anywhere if it's possible to connect breakout board output signal to FVD, so that FVD starts when output signal from breakout board is HIGH...