Stepper wiring/colour coding

[rwb97]

Okay, so I've got a bit further... I think.
I've tried all the ports/pins settings I've tried before, including the ones cropwell gave me. This time, the motors make quite a bit of noise, and I did get one to vibrate when I was using the jog tool. My parallel port says it's base address is CCF8, I tried putting this into Mach as 0xcf8 and 0xccf8 what is the correct format? Beyond this is it just a case of trying to get the right ports/pins, or have I wired the motors wrongly, or have I got the wrong step settings on the DIP switches? Thanks again.

[rwb97]

Ahhh this must be good news, I've noticed the axis work indicator LED's come on on the driver board (VERY faintly) when I press the corresponding axes jog buttons in mach 3... I guess this means the ports/pins settings must be right, and it is either the stepper wiring or the DIP switches I have wrong?