Stepper wiring/colour coding

[JAZZCNC]

If you want to test how good your parallel port is then run the Driver test in Mach3 folder.! . . . Look for file called Driver test.!! . . . This will show better if your PP is up to speed.?

[cropwell]

Just another thought about pins :- the enable pins for the axes might be better set high, even though the TB6560 has internal pull-up resistors, a floating pin could cause problems. X=4, Y-17 and Z = 5.

[rwb97]

Yeah, found the driver test when I was trying to get it to work when I was trying on windows 8, Will try it on 7 when I get home, thanks for your suggestion! I will also try those enable pin settings.