Aluminium cutting

[Bush Flyer]

I have just ordered a heap of aluminium and Five 1/8 single flute bits for cutting aluminium. When They arrive I will start at one setting and keep a note of exactly what the feed and speed is and go from there. The plan is I will take a slice right through the aluminium from one side to the other ie. mill a slot 1/8th wide.
The aluminium is 6082 T651 the end mill is 1/8th (3.175mm) carbide it is 38mm long 20mm will over hang the collet the cutting edge is 12mm long, the feed it will be 325mm per minute, plunge is 254mm per minute, the spindle rpm 12000, and the depth of cut will be 1mm.
Any advice about changing some of the settings will be welcome.

[cropwell]

Worth a look
Sorotec - Werkzeuge click the flag to translate it to English,
.
but with shipping costs you have to buy about £50 quids worth to make it worthwhile.