-
02-05-2014 #1
Hello Everyone,
I need you help for a little academic research on CAM CAD software. Here is a little survey you can reply with a thread. Every help will be appreciated.
Thanks, Lorenzo
FROM 1 to 5 (1 low / 5 High)
ex: how satisfied are with your software: 3
how satisfied are with you software:
how easy is to use:
how clear is the user interface:
how safe do you feel to use it:
how much would you prefer a different interfaces:
AGREE / NOT AGREE / NEITHER
ex: the software is fine: AGREE
the software is clear to use from the beginning:
the software is safe to use:
the system (hardware+software+position+safety) is easy to use and comfortable:
I feel confident in working on my own:
the steps are clear and progressive:
help guide is easy to consult:
-
02-05-2014 #2
Hi Lorenzo, I use CAD/CAM package that came with my used commercial CNC router. I am aware that it is expensive, but I was lucky enough to get it with the machine. I use Alphacam (not the latest version)and find that it ticks all the boxes for my own use (2D only). For me it ticks all the boxes and I could only give it maximum points in all areas. G.
-
02-05-2014 #3
How can it be determined if the software is safe to use ? I can't see any of it being developed to IEC61508 standard for example, what is the required Safety Integrity Level (SIL) for a CNC machine ?
Last edited by EddyCurrent; 02-05-2014 at 10:51 AM.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
03-05-2014 #4
Your survey does not meet the criteria for an academic one as you've asked questions about hardware and working arrangements in what you first stated was a Software Survey.
2/10 - See Me!
;-)
- Nick
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Newbie. Questions about design software and machine control software
By MTech in forum Computer SoftwareReplies: 2Last Post: 11-12-2012, 12:58 PM -
Which Software
By manofgresley in forum CAD & CAM SoftwareReplies: 1Last Post: 26-12-2011, 04:08 PM -
New Software
By luke11cnc in forum CAD & CAM SoftwareReplies: 5Last Post: 14-09-2011, 06:00 PM -
Which Software
By Ricardoco in forum CAD & CAM SoftwareReplies: 41Last Post: 12-01-2011, 04:43 PM -
What software ??
By Kammo1 in forum Computer SoftwareReplies: 11Last Post: 07-09-2007, 01:46 PM
Bookmarks