Trying to make an ultimate sanding drum!

[fatguyslim]

Hey Eddy, thanks for your quick reply I have actually thought of that but bamboo does not have a uniform diameter and the reamer will simply split the poll once it hits a slightly tapered part. What I am trying to achieve is a much wider and longer version of these http://file.maxtie.com/images/produc...5346989781.jpg. This will allow me to wiggle the poll side to side so that I can shave the inside of the poll nicely without cause the split. Thanks

[FatFreddie]

How about these....

Microplane Rotary Shapers

You could make a carrier to take several of them in a row - a 10 / 12mm threaded bar with spacers trapped between nuts easy enough to make up. They're fairly expensive but good quality.

Axminster have them in stock but a trawl of ebay might turn up something cheaper.

Microplane Rotary Shaper Replacement Blades - Drum Sanders - Abrasives - Fixing, Gluing & Finishing | Axminster.co.uk

[fatguyslim]

Hey FatFreddie, this is very interesting tool. I think rather than putting a threaded bar through the middle I might just put these shapers of my round aluminium bar. I might just give this a go and see what happens. Thanks a bunch man!!!