. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 03-05-2014 #1
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Ok no prob just read like you where connecting to a BOB.!! . . . . Yes the CSMIO/IP-S is an awsome bit of kit as is the IP-M version just wished it would do slaved motors like the IP-S.!

    The enable is just in affect a switch that is always ON unless it it see's a voltage. (It's active state can be changed with the software) 95% of the time folks leave them unconnected. The enable is an Handy thing to put in series with limits as it will stop the motors moving but still keep them powered and holding position.

    The INP+/- (In position) I would just leave unconnected. IT could be used as a following error indicator but I wouldn't bother as it could be more trouble than it's worth.!

    Ring anytime you feel the need.!
    Last edited by JAZZCNC; 03-05-2014 at 10:56 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CSMIO/IP-M vs Ethernet SmoothStepper (Begone foul parallel port!)
    By Greeny in forum Control Hardware & Systems
    Replies: 20
    Last Post: 14-11-2013, 11:59 PM
  2. cnc wiring
    By crossleymarko in forum Gantry/Router Machines & Building
    Replies: 1
    Last Post: 09-04-2012, 09:35 PM
  3. wiring help
    By deannos in forum Motor Drivers & Controllers
    Replies: 3
    Last Post: 08-06-2011, 02:20 PM
  4. help me for wiring
    By ali hedi in forum General Electronics
    Replies: 0
    Last Post: 28-11-2010, 01:20 PM
  5. Wiring Help
    By Toddy in forum Motor Drivers & Controllers
    Replies: 8
    Last Post: 23-11-2010, 01:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules