Hybrid View
-
08-05-2014 #1
Hi,
I am after one of the following oils for my machine as they are recommended in the manual. Does anyone know where I can buy a liter or five liters of any of them? I have looked high and low and had a ring round but with no success.
BP : CS 68 Reservoir
Shell : Vitrea 68 capacity
Castrol : Perfecto NN
If anyone can point me in the right direction of one of the oils that would be real handy. I guess if not I will go an equivalent.
Many thank
suesi
Last edited by suesi34e; 08-05-2014 at 02:00 PM.
-
08-05-2014 #2
All those oils have been superceded/discontinued.
Is this for your mill?
If it is, get some 68 weight slideway oil. There's plenty choice, so just pick whatever you happen to be able to get at a quantity/price that suits you.
Personally, I'm currently using Shell Tonna M3, as it's pretty high spec and I found it at a good price.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
08-05-2014 #3
Hi m_c
Thanks for your post the oils superceded/discontinued then thats why I could not find them!
Yes it is fro my mill and I better gets some quick as it is nearing the low level. I will see if I can find the Shell Tonna M3 as you asy it is good spec. Failing that perhaps I may try this one on ebay or a Rock Oil one.
Delaway Slideway Oil 68 | eBay
Many thanks for your help it has put me in the picture and I now know what is good
All the best
suesi
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Spare Capacity?
By Lance in forum General ElectronicsReplies: 0Last Post: 25-05-2011, 10:49 AM -
eBay: Castrol Cooledge Cutting Coolant Suds
By Lee Roberts in forum Items On eBay UKReplies: 3Last Post: 09-08-2009, 09:42 PM
Bookmarks