bolt on rail and block bearings or what ever - what have you

[Clive S]

hello

can you post them too???

wanted no circular rail
thk style bolt to t-slot rail wanted
can be anything up to 32mm in width across the two dooberies

4 bits 600 long.8 bearings
bearings can be two peice whatsnames



also wanted long closed toothed belt,
3 motors and dives and psu
4 toothed pulleys
4 flanged idler pulleys

prefer a 20mm ish sized belt

So you just want a bag of assorted bits? Posted to where ever will do. ..Clive

[JAZZCNC]

So you just want a bag of assorted bits? Posted to where ever will do. ..Clive

Come on Clive can't you see he wont's a Bag of "THINGY's". . for the "Dooberies" so he can fasten it to his "Whatsnames". .!!!

[nobby]

ok
two 2525mm 25mm wide 5mm pitched closed loop belts
eight pulleys to match with the edged rim
four nema 23's dual shafts not 76mm long 3.1nm the smaller ones
for 25mm idler bearings
four lengths of thk rail I do not care what width as long as the bearings are there and all four are at least 600mm long