Thread: Steel vs Aluminium
-
26-05-2014 #1
Is it possible for Alu alloys to be as strong as mild steel for cnc machine parts like gantry ends, beams, mounting brackets and z axis plates?
CNC routing and prototyping services www.cncscotland.co.uk
ADD ME ON FACEBOOKS
-
-
26-05-2014 #3
I was talking to a mate about this recently.
5059 Alustar is pretty strong - nice article here:
All about aluminium
So, yes - it can be. But it's probably prohibitively expensive for our uses...
Wal.
-
26-05-2014 #4
Don't get confused between strength and stiffness. Totally different things.
Strength is how much load something can take before it starts to stretch (yield point) and then before it breaks (UTS, ultimate tensile strength).
Stiffness is how much something will deflect for a given load (Young's modulus), below the yield point.
For a CNC machine all we are interested in is the stiffness, as that influences deflection at the tool due to cutting along with vibration. Get the stiffness right through design and gauge etc. and the strength performance is likely to follow.
Strength is simplistically (ignoring fatigue) either good enough or not. It either breaks when you do the first cut, or it does not.
Stiffness on the other hand is a sliding scale.
Take 3 identical machines using different materials:
1. General aluminium
Strength (yield) 400Mpa
Stiffness (Young's) 70GPa
2. 5059 aluminium
Strength (yield) ~450Mpa
Stiffness (Young's) 70GPa
3. Mild steel
Strength (yield) 450Mpa
Stiffness (Young's) 210GPa
Swapping general aluminium for 5059 aluminium does indeed get you a stronger machine (higher yield), but it is not stiffer (similar Young's modulus). It will still bend the same amount for a given load, and will still bend much more than steel. It is this bendiness which is important, not the ultimate strength.
-
The Following 3 Users Say Thank You to routercnc For This Useful Post:
-
26-05-2014 #5
Excellent post routercnc. Thanks for the info.
Wal.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Need help, buy or build to cut steel, stainless steel, titanium etc
By fatguyslim in forum Machine DiscussionReplies: 41Last Post: 08-02-2014, 11:37 PM -
BUILD LOG: Steel/Aluminium design/build, sorta smallish, cuts ali hopefully
By mart154 in forum DIY Router Build LogsReplies: 27Last Post: 19-09-2013, 05:48 PM -
Milling Steel?
By Musht in forum Metalwork DiscussionReplies: 12Last Post: 02-12-2012, 08:00 PM -
WANTED: Steel Off-cut!
By Tenson in forum Items WantedReplies: 1Last Post: 27-04-2012, 05:59 PM -
Aluminium passivation - for aluminium to be used outside
By CHudson in forum Metal Finishing TechniquesReplies: 4Last Post: 06-04-2011, 09:18 PM
Bookmarks