. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 04-06-2014 #11
    Wal's Avatar
    Lives in Stockport, United Kingdom.
    Wal
    Last Activity: 15-12-2024 Has been a member for 9-10 years. Has a total post count of 491. Received thanks 71 times, giving thanks to others 29 times.
    >Cool guys, How deep are those channels?

    They don't need to be as deep as I've illustrated 'em - I think 2mm would be under-doing it a bit - mix too little (or if the frame's level is slightly off) and you're maybe gonna end up with bald-spots... I'd calculate for a 5mm thickness of epoxy and don't forget to make the channel wide enough so that the resulting strip of epoxy supports the full width of the rail.

    That's about the extent of my knowledge regarding this technique - someone will be along soon to better advise!

    Wal.
    Last edited by Wal; 04-06-2014 at 08:25 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 6 users browsing this thread. (0 members and 6 guests)

Similar Threads

  1. Need advice for a new machine?
    By az786again in forum General Discussion
    Replies: 7
    Last Post: 05-03-2014, 02:04 PM
  2. NEW MEMBER: Designer with a plan looking for advice
    By bigstu67 in forum New Member Introductions
    Replies: 2
    Last Post: 10-10-2012, 06:04 PM
  3. Advice about a sentence concerning CNC Machine!!!
    By hoezap in forum General Discussion
    Replies: 5
    Last Post: 09-11-2011, 02:25 AM
  4. cnc machine buyers advice
    By wyndham in forum Marketplace Discussion
    Replies: 0
    Last Post: 29-06-2011, 06:52 PM
  5. Machine Buying advice
    By jrob3rts in forum Marketplace Discussion
    Replies: 0
    Last Post: 17-09-2010, 04:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules