Im new, am a 3D designer. Need a New cnc machine and need advice and guidance

[FlyHighRC]

im thinking something along the lines of 600x600x100mm working area... Could you guys fill me in on what you reckon is best of these which I have found so far.

CNC1 - I have seen videos of this machine with good results gutting aluminium

CNC2 - I like the look of this machine but there is not much about it online...looks good but i hear allot of chattering while cutting aluminium

CNC3 - I like this one because of its low cost but am feeling quite skeptical of its linear movement mecanism, looks like it could be sloppy after allot of use


Thanks guys, so far this is what i have managed to find with my limited knowledge on these machines.

[dazza]

you be pissed off in no time shelling out for them then cutting aluminium

these are the 6040,s I mentioned 3-axis CNC 6040Z-S65J Router Engraver Milling Drilling Cutting Machine CNC 6040 | eBay
at least some of them come with a water cooled spindle but I still wouldn't buy that,with aluminium in mind ,although some get by with em and they have a following,with a 1400 quid budget consider making one