true, Its just the way I have designed before, And the irony is a good designed plane is always designed around the propellor... Oh, I do have some big motors. 1600W to run on 22V, it is lying around and never came up with a use for it...And I have seen people use brushless motors as spindles... any success?

The machine I would Ideally have by the end of this is as:

roughly 800x600mm though that can give or take a bit...though preferably a little bigger than smaller.
Be able to machine carbon/glass fibers, plastics, woods and be able to do some aluminium work without feeling restricted
Be simple,cheap and easy to use.


They are my basic requirements :)