Im new, am a 3D designer. Need a New cnc machine and need advice and guidance

[FlyHighRC]

So I have nearly completed the first draft of my design, Im very comfortable with being able to make this machine with the tools and equipment I have access too. The gantry im happy with and the way in which the gantry is mounted to the rails. Im also happy with the location of the rails, steppers and mounts etc... the ball screw support blocks have yet to be mounted to a plate(next job) then onto the z axis :)

The frame is mostly 60x60x3mm box section with the gantries vertical section and support section being 40x40x5mm, Hopefully you guys approve this design...in which case I start my budget plan to make sure it can be built within my budget. Then progress to the parts list and DXF files for the laser cut stepper mounts and then go from there :)

Added some colour to give it a bit of life...