Threaded View
-
04-06-2014 #1
Hi everybody
Yesterday i receive from Chai the above things
-------------------------------------------------------------------------------------------------------------------------------------2X anti backlash ballscrews RM 2010 C7 end machined -1603mm Overall length
2 ballnuts for 2010 ballscrews1X anti backlash ballscrews RM 2010 C7 end machined -1153mm Overall length
1X anti backlash ballscrews RM1605 C7 end machined -501mm Overall length
1 ballnut for 1605 ballscrew3 Set of BK/BF15 1 Set of BK/BF12 1x Ball Nut Mount/Bracket Flange For 1605 3XBall Nut Mount/Bracket Flange For 2010
I open the box to see if everything is ok
I attach the bf/bk at the ballscrews, and i realize that the screws seems to be bended
I give them motion with a wireless drill and they are "dancing" like crazy especially one of the 2010 1603mm long ballscrew. It seems to move 4-5mm out of the center axis. Also the other three are whipping(1-2mm).
Here are the videos that i capture
The worst one is at video #1 bended ballscrew 1603mm long - YouTube
At the following videos 0-4 the ballscrew is rotating with the help of a cordless drill and the bf/bk fixed on a C shape beam
At the Videos 5-7 i rotate the ballscrew with my hand.
0 bended ballscrew 1101mm long - YouTube
1 bended ballscrew 1603mm long - YouTube
http://youtu.be/TWbHcTfAPws
3 bended ballscrew 1101mm long - YouTube
4 bended ballscrew 500 mm long - YouTube
5 bended ballscrew 1101mm long - YouTube
6 bended ballscrew 1603mm long - YouTube
7 bended ballscrew 1603mm long - YouTube
My questions are
1. Is this bend so bad that make the ballscrews useless
2. Is there any way to correct the bend
3. What should i expect from Chai?
a.To refund me the money?
b. send other ballscrews with no cost?
c. Something else?
4. If i put that screw to my machine should i have resonanse or bearing ware problems?
5. Did anybody had such problem with Chai? if yes what Chai did ?
Thanks
VagelisLast edited by ba99297; 04-06-2014 at 09:13 AM.
The creative adult, is the child who survived
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Centec 2 ballscrews
By jonnydeen in forum Lead Screws, Nuts & SupportsReplies: 29Last Post: 11-07-2023, 09:53 AM -
machining ballscrews
By T0rnado69 in forum Lead Screws, Nuts & SupportsReplies: 11Last Post: 13-04-2014, 11:39 PM -
machined ballscrews
By wilfy in forum Lead Screws, Nuts & SupportsReplies: 15Last Post: 30-07-2012, 05:42 PM -
Two ballscrews on both X and Y axis?
By Jonathan in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 02-02-2012, 01:55 AM -
supports for ballscrews
By leadinglights in forum Lead Screws, Nuts & SupportsReplies: 2Last Post: 27-04-2010, 12:31 PM
Bookmarks