-
04-06-2014 #1
I will be buying a hobby sized machine, but would it be possible to make this part on such a machine.
Denford triacs
Or
Emco 55 size, if I can't find 1 then would have to be syil 4X plus.
Now the size from top to bottom are
10mm dia 8mm across flats
10mm dia x 30mm long Stepped to 12mm x 18 long Stepped 20.5 x3 long.
Then the larger dia of 57mm x 23.5
Turn it round I then have 54mm bore 21 deep, this is a Ti clutch bell for an Rc car.
I made the 1 above on a manual lathe, I understand a lathe would be best for making this but would this be pos on CNC miller.
Thanks
Sent from a GS4 using tapacrapLast edited by Dean jeffery; 04-06-2014 at 10:42 AM.
-
04-06-2014 #2
>but would this be pos on CNC miller.
No reason why not, but you'd be getting into jigs and having to think seriously about some work-holding issues.
If I only had one to make (in an emergency) then I'd give it a go. It does seem like the long-winded way to go about it - but that could as well be my lack of knowledge/experience...
Wal.
-
The Following User Says Thank You to Wal For This Useful Post:
-
04-06-2014 #3
-
The Following User Says Thank You to Jonathan For This Useful Post:
-
04-06-2014 #4
Holding should be no problem, bored 3 jaw chuck machine the shaft end, turn over machine the rest. But may flex and want to shove it over or pull it out.
Think I'm asking to much TBH just hoped somebody has done something simlar with success.
I made just 1 of these on the lathe for personal use, only 1 off in the world made from Ti, also made a few of these from Ti again nobody has Ti versions.
1 off the above has been made from alloy, but sold the lathe and now people are wanting Ti versions.
The carriers above look like this when done.
The clutch bell
Sent from a GS4 using tapacrapLast edited by Dean jeffery; 04-06-2014 at 11:57 AM.
-
04-06-2014 #5
Lovely work man.
Wal.
-
The Following User Says Thank You to Wal For This Useful Post:
-
04-06-2014 #6
Cheers
But now abit stuck on what route to take, if access was not an issue i would simply buy a cnc lathe and miller. But limited to just 790mm down the side of my house, so needs a small lathe and miller.
Just thought i would buy a lathe, machine what i wanted (needed) then sell on, not nothing people would want them when complete.
-
05-06-2014 #7
delete please...
Last edited by irving2008; 05-06-2014 at 01:17 AM.
-
05-06-2014 #8
-
05-06-2014 #9
The post I made in error!
Sent from my HTC One_M8 using Tapatalk
-
05-06-2014 #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
WANTED: Hobby CNC Mill
By smartbusa in forum Items WantedReplies: 3Last Post: 08-10-2013, 09:42 AM -
WANTED: Bridgeport style miller wanted/ Boxford VM30 miller part ex or sale.
By border in forum Items WantedReplies: 2Last Post: 02-04-2012, 09:13 PM -
NEW MEMBER: Just joined, hobby level
By cncgcg in forum New Member IntroductionsReplies: 12Last Post: 03-12-2011, 02:32 PM -
RFQ: Parts for my hobby from your hobby
By Phobia1 in forum Projects, Jobs & RequestsReplies: 1Last Post: 18-01-2011, 02:57 PM -
NEW MEMBER: It's now officially a hobby!
By Ionman in forum New Member IntroductionsReplies: 1Last Post: 30-12-2010, 08:58 PM
Bookmarks