Hybrid View
-
10-06-2014 #1
Afternoon all,
Just signed up as I am now the proud owner of a Triac FANUC ATC. That's the good news. The bad news is I am a bit (read "a lot") clueless on the CNC side of things but I am will to learn!
Hoping to make large (1/5 scale) RC models once I get to grips with the technology...
The machine is 3 phase so my first challenge is getting it up and running on a single phase supply. I shall post a thread in the electrickery section on that one.
Anyhow, better do some paid work I suppose,
TTFN
Charlie.
-
10-06-2014 #2
Afternoon all,
Just joined up as I have recently become the proud owner of a Denford Triac fanuc ATC.
I am somewhat clueless on the CNC front but am willing to learn and hope to mine you clever lot for information and guidance :)
I hope to make 1/5 scale RC models once I get to grips with the technology...
The machine is 3 phase so my first challenge is getting it to run on a single phase supply. I shall put a post in the electrickery forum for help on that one.
Anyhow, best do some paid work I suppose...
Cheers,
Charlie
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Operation Clueless, CNCRP 4848 Build Log Eventually.
By BedlamRik in forum DIY Router Build LogsReplies: 12Last Post: 28-12-2012, 12:39 AM -
newbie needs help
By pauley555 in forum Milling Machines, Builds & ConversionsReplies: 1Last Post: 05-07-2012, 09:48 PM -
NEW MEMBER: CNC Newbie
By packman in forum New Member IntroductionsReplies: 6Last Post: 11-05-2012, 10:07 AM -
NEW MEMBER: newbie
By stevedemicoli in forum New Member IntroductionsReplies: 5Last Post: 31-03-2012, 10:12 AM -
NEW MEMBER: Newbie here
By Mr Tim in forum New Member IntroductionsReplies: 0Last Post: 23-08-2011, 08:50 PM
Bookmarks