Thread: Let the fun begin !!! ???
Hybrid View
-
06-08-2014 #1
Last Activity: 29-06-2025
These are the motors I used, they perform well.
http://www.cnc4you.co.uk/index.php?r...product_id=367Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
The Following User Says Thank You to EddyCurrent For This Useful Post:
-
06-08-2014 #2
Last Activity: 30-04-2020
i'm going to put this m/c in my garage and that has a 6 ^2 twin and earth supplying the fuse board. it has ELCB. protection and an MCB for lights and MCB for sockets which supply a freezer, washing m/c and dryer in a separate room at the back. am i exceeding the supply with a m/c spec of this size? would anyone know the amperage required for a build of this spec.?
crisis averted, i 'm told 6mm2 is good for 35 amps. should be fine, i hope!!!
Last edited by PAULRO; 06-08-2014 at 04:45 PM.
-
06-08-2014 #3
Last Activity: 29-06-2025
My shed is supplied by 6mm^2 armoured cable, I have a machine with 4HP motors and a powerfull dehumidifier, plus other smaller machinery. This works because there's only me in there so there are only 2 things at most operating at the same time.
I keep meaning to measure the current taken but as yet I've not found my clamp meter.Last edited by EddyCurrent; 07-08-2014 at 10:28 AM.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
-
The Following User Says Thank You to EddyCurrent For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
NEW MEMBER: Hello everyone. Total newbie here. Where do I begin?
By DarkWalkJRB in forum New Member IntroductionsReplies: 2Last Post: 07-02-2012, 08:31 PM
Bookmarks