. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 15-01-2015 #34
    PAULRO's Avatar
    Lives in LIMERICK, Ireland.
    PAULRO
    Last Activity: 30-04-2020 Has been a member for 9-10 years. Has a total post count of 180. Received thanks 2 times, giving thanks to others 201 times.
    The grease did the trick ok. 3 circuits, 16 balls ( dia. of 0.1245") in the first two and 17 in the last . it took a couple of trys but i got there. so cheers for the advice and videos links, very informative. the extrusion i used had a slight angle on the broad side and an incline on the narrow side .it played havoc with my assembly so i had to re- machine some supports and change the design of the gantry. i also spent a fair bit of time on the bottom Y rail to get it flat.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to PAULRO For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Hello everyone. Total newbie here. Where do I begin?
    By DarkWalkJRB in forum New Member Introductions
    Replies: 2
    Last Post: 07-02-2012, 08:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules