Let the fun begin !!! ???

[Clive S]

I have noticed that when any of my ,X,Y,Z, limts are triggered MACH responds with a ''PLCM limit reached '' under the reset button . the ''M2 -- LIMIT'' led , flashes briefly in the diagnostic tab under the ''Z'' column and my motors also loose their hold on the axes. when the ''A'' is triggered i get the same result but M4--LIMIT'' flashes in the same column

I have checked mine this morning ( I also use the PLCM) and indeed it does release the motors when hitting a limit switch when jogging. So you always have to re home. I would of course not hit the limits in normal use because the soft limits are set to just inside the switches. (unless of course the machine was losing steps) ..Clive