Threaded View
-
23-06-2014 #1
This part is a joystick crossmember (for the 1980s classic Defender).
Stainless steel (maybe aluminium if that's all I can get done).
1/2" square or 1/2" AF hexagon (your choice, I can supply it)
The spigots are approx 6mm for a sliding fit with a 6x17x7 bearing (I can send you sample)
The angled hole is to suit a 4mm roll pin (I can send you a sample).
I might want a variety of main hole diameters eg 5.7mm to 6.4mm (to allow a decent fit of various worn handles)
alternatively a single hole size and advice on how to open it out.
I'll want a first off, and then a batch of about 50.
I might be able to change the roll pin hole to perpendicular if that makes a difference to whether the job gets done.
Any advice (materials, methods, design, other forums to ask) also appreciated.Last edited by jimbo_cnc; 23-06-2014 at 08:46 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: Very simple small part
By Shinobiwan in forum Projects, Jobs & RequestsReplies: 5Last Post: 11-01-2013, 01:02 AM -
RFQ: Request: 200 units of a small part
By craynerd in forum Projects, Jobs & RequestsReplies: 1Last Post: 13-02-2012, 10:25 AM -
RFQ: RFQ: 3 x M5 holes drilled and tapped/ +/- 0.01mm required
By neurofen in forum Projects, Jobs & RequestsReplies: 9Last Post: 25-01-2012, 04:26 PM -
RFQ: cnc woodern car buck quotes please
By allkarma in forum Projects, Jobs & RequestsReplies: 3Last Post: 23-05-2011, 03:58 PM -
Request for two small steel rod-esque lathed part!
By HankMcSpank in forum General DiscussionReplies: 42Last Post: 29-06-2009, 02:32 PM
Bookmarks