That's the problem with EMC, it's written by techies, for techies

One thing I noticed in the first post Nema 34's rated at 160 oz in ??

How old are those motors ? if they are the old round style and not the more modern square type this could be your problem.

Another thing is has anyone checked the Routout 10 amp drives on a scope for clean signals ? the smaller drives are terrible but I have never tried the larger drives, I can't see any point in going to 10 amps but having a voltage ceiling of 37 volts and this is advertised as Absolute maximum so say 30 volts for safety.

I was dubious reading the spec sheet where it says can run up to a Bridgeport at 2500 mm / min ???????

.