HI Mike

Thank you for your reply.

I was thinking the working area should be 1250 x 1500 mm.
Cutting wood, Lexan/acrylic but also aluminium.



Quote Originally Posted by mekanik View Post
Hi Pete
Welcome to the forum.
I am new @ this game but do visit a couple of times a day, if you read some of the posts you will find that kits and even some expensive(for what they are) manufactured machines are well below an acceptable quality/accuracy, most of the guys eventually (with a lot of help from the forum members) realise that to get a decent machine @ a reasonable cost they have to make one. This might sound a bit daunting but the guys on the forum are very helpfull and will put you on the right path.
If you could let us know what kind of surface area you need and the type on materials you wish to machine this will give us a better idea of a suitable construction.
It could be possible that on of the fleabay chinese machines might suffice if you were only wanting it for light engraving of PCB manufacture.
Regards
Mike