Hybrid View
-
25-06-2014 #1
Hopefully this is what it will look like: Nearly fully Drawn
Ears welded up to support the z axis
Z axis sides, 20mm thick:
The z axis fully built ready to be surface ground:
Surface ground and holes drilled and tapped for the ears:
Just checking the squareness: looks pretty good although this is adjustable on final assembly:
Mock up:
Steps machined for linear rails and ball screw supports and nut:
All holes drilled for linear rails, ball screw supports and the screws which will push them towards the parallel edges:
Y axis plate machined and holes drilled ready to mount the rails and then surface ground:
Last edited by totts; 25-06-2014 at 08:57 PM.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
WANTED: cnc milling machine
By bigred5765 in forum Items WantedReplies: 14Last Post: 25-04-2014, 11:08 PM -
WANTED: X3 CNC milling machine
By Nemo1966 in forum Items WantedReplies: 1Last Post: 09-11-2013, 10:42 PM -
WANTED: Milling machine head
By Ainis in forum Items WantedReplies: 0Last Post: 23-07-2013, 09:30 PM -
New CNC Controller for Milling Machine
By antsals in forum Electronic Project BuildingReplies: 26Last Post: 08-04-2012, 06:09 PM -
First CNC milling machine help
By newtoid1986 in forum Milling Machines, Builds & ConversionsReplies: 0Last Post: 05-09-2011, 10:06 PM
Bookmarks