Routing Tool For Quality Plastic Finish (i.e Minimal Burrs)

[SB463]

No problem I hope it works for you, try and use a cutter with more flutes as well, this may break up the chips and burrs more frequently and so help to leave less of a burr.

.Me

Well I gave it a try but it didn't turn out well but that may be due to the speed.

It might help if you state what cutter size, flutes feeds and speeds you are using now.

to me it look like you are melting it. ..Clive

Let me add that my experience with all this is minimal, I've been dropped with the task now that the operator has left.

But here is the information you need:

Feedrate: 2200mm/min
Speed: 2000rpm
Cutter: 6mm Endmill with 2 flutes.

Thanks,

Jordan