Threaded View
-
24-08-2014 #9
Last Activity: 2 Weeks Ago
I was thinking about a loose tongue now, similar to a biscuit but full width and shaped like the joint, probably plywood, that eliminates the end grain issue.
The grooves in the end of the boards could be cut with a T slot cutter so they all lie flat on the table. but . . .
With regard to the other cnc joints, I would never make them myself and you are correct about oversize, I like to take at least one shaving off with a sharp hand plane.Last edited by EddyCurrent; 25-08-2014 at 08:44 AM.
Spelling mistakes are not intentional, I only seem to see them some time after I've posted
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
wooden joints
By luke11cnc in forum Woodwork DiscussionReplies: 7Last Post: 18-10-2012, 11:59 PM -
Interested in and available for on site machining
By themachinist in forum General DiscussionReplies: 11Last Post: 25-09-2012, 11:27 AM -
NEW MEMBER: Have woodwork, looking for a router owner who may be interested
By Lance in forum New Member IntroductionsReplies: 2Last Post: 08-06-2011, 01:28 PM -
Bolted Joints and Thread Fasteners
By Lee Roberts in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 01-04-2011, 09:53 AM -
NEW MEMBER: Hello Im interested in joining you all
By Guisborough in forum New Member IntroductionsReplies: 3Last Post: 18-08-2010, 11:01 PM
Bookmarks