Various CNC Components, Steppers, Drivers, Hiwin linear guides, Gearboxes (SIBONI)

[MOCNC]

Hi All,

Selling a loads of cnc bits, most of them have been used lightly but in good working order!#

Make me an offer and grab yourself a bargain, it all must go!

3 off Nema 34 4nm 8 Wire steppers from motion control products (never used)


5 off Nema 34 Stepper motors, 4nm from Zapp (3 Unused)


6 off Kinco high voltage drivers from Zapp (2 Unused)


9 off Hiwin HGW 15 Carriages(4 used 5 unused)
Also have 2 off pieces 300mm and 2 off pieces 1500mm of the corresponding HGR15 linear guide


4 off HGW 25 Carriages (all used)
Also have 2 off pieces 3500mm of the corresponding HGR 25 linear guide



3 off Siboni 5:1 Nema 34 planetary gear boxes with 8nm Steppers


4 off Allen Bradley IP Rated E-stop Switches (never used)


6 Pieces of Module 1 15x15mm Gear Rack, Drilled & counterbored on 65mm Centers

Hi can you also e mail me a price list please.

thanks
mo

[andrewbond]

Hi everyone,

Thanks for the interest but afraid someone has taken the lot off me last night,

Again thanks for the interest!

Regards
Andrew