. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 05-07-2014 #16
    irving2008's Avatar
    Lives in NW London, gateway to A1 & M1, United Kingdom.
    irving2008
    Last Activity: 17-03-2017 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,849. Received thanks 179 times, giving thanks to others 5 times. Referred 6 members to the community.
    Quote Originally Posted by Skydeals View Post
    ...
    So from what I gather, Ill connect all the screens to the star point from the motor end. Should I use any specific wire for connecting screens to star point?
    No. The screens are connected to the star point at the driver end. The correct way to do this is to separate out the braid and solder onto it some hook up wire (use 7/0.2 or 16/0.2) then fold it back and put 1.5cm of heatshrink over it to 'seal' the end. At the motor end cut the braid off and again 'seal' the end with heatshrink. Keep the unshielded cables as short as you can without straining anything.

    Click image for larger version.  Name: wiring.png  Views: 535  Size: 7.9 KB  ID: 12734
    Last edited by irving2008; 05-07-2014 at 10:24 PM.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to irving2008 For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Query - Zen Toolworks looky likey
    By Plod in forum Marketplace Discussion
    Replies: 9
    Last Post: 30-11-2013, 01:15 PM
  2. Help, electronics
    By totts in forum Motor Drivers & Controllers
    Replies: 2
    Last Post: 14-09-2011, 09:09 PM
  3. A simple query about homing switches & milling practise
    By HankMcSpank in forum General Discussion
    Replies: 5
    Last Post: 13-06-2009, 11:56 PM
  4. Monowheel - No electronics
    By BillTodd in forum General Discussion
    Replies: 0
    Last Post: 09-06-2009, 09:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules