-
08-07-2014 #1
Hi,
I want to build an Openbuilds Ox cnc machine. See http://www.openbuilds.com/builds/ope...c-machine.341/. I have my home-built cnc rose engine and I thought that I could machine the aluminium plates required using that. Unfortunately the nature of my existing machine makes it just too small to mill around a 200mm x 300mm area which is required for each of the two side plates, so therefore I cannot create the plates myself.
Therefore I am hoping that someone from this forum would be willing to help or could do the job for me at a reasonable cost. The openbuilds design is given in a sketchup 2014 file and annotated so that the SketchUCam plugin will create a gcode file to cut the parts either individually or all 4 from a single 310 x 520 sheet. So I can provide Gcode files.
I live in Nottingham and would be very grateful if there was someone reasonably close by who could help.
Thanks
Alan
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
RFQ: 8 off steel plates required, drawings attached
By TonyD in forum Projects, Jobs & RequestsReplies: 1Last Post: 10-05-2014, 10:26 PM -
RFQ: 4 and 5mm steel plasma / laser cutting required, can send sheetcam files
By nobby in forum Projects, Jobs & RequestsReplies: 0Last Post: 29-04-2014, 12:36 PM -
new build opinions required
By george uk in forum Gantry/Router Machines & BuildingReplies: 76Last Post: 04-02-2014, 10:46 PM -
Z axis not cutting to required depth
By dinasblu in forum Machine DiscussionReplies: 10Last Post: 02-07-2012, 05:38 PM
Bookmarks