. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 09-07-2014 #2
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    This won't be your problem it will most likely be else where why your getting missed steps.! . . .But for people to help more then you'll need to provide much more info about the machine and how you have it setup.

    Edit: First port of call is to try another parallel cable before doing anything else.!
    Last edited by JAZZCNC; 09-07-2014 at 11:25 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. bumping holding current - how it affects torque?
    By dsc in forum Stepper & Servo Motors
    Replies: 7
    Last Post: 03-02-2014, 04:11 PM
  2. TB6560 auto current reduction
    By Mjolinor in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 08-12-2011, 09:53 PM
  3. Current Set Resistors.
    By NzOldun in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 20-06-2011, 08:38 AM
  4. G540 Current set resistors
    By blueseidboy in forum Motor Drivers & Controllers
    Replies: 3
    Last Post: 23-08-2010, 02:21 PM
  5. Simple Current Limiter (LM317)
    By Mad Professor in forum General Electronics
    Replies: 14
    Last Post: 13-07-2009, 10:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules