Threaded View
-
15-07-2014 #2
Last Activity: 13 Hours Ago
Steven The motors from cnc4you are good quality but the drives are better bought else where something like Leadshine AM882 or M860 I would think carefully about using the existing screws if they are of the acme type. Ball screws can be got from Chai at linearmotionbearings2008.
If you are used to Linux Linuxcnc is very good. ..CliveLast edited by Clive S; 20-07-2014 at 08:20 AM. Reason: corrected as Irving pointed out. Thanks
-
The Following User Says Thank You to Clive S For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CONVERSION: Amadeal AMA 25LV Mill to CNC
By Sherlock Holmes in forum Conversion Build LogsReplies: 3Last Post: 07-01-2020, 11:29 AM -
CONVERSION: Harrison Mill Conversion
By m_c in forum Conversion Build LogsReplies: 18Last Post: 27-10-2016, 07:15 PM -
CONVERSION: Sx3 mill conversion
By dazza in forum Conversion Build LogsReplies: 1Last Post: 29-04-2014, 10:23 AM -
CNC Fusion Kit for Warco mini mill / Amadeal XJ12-300
By rnr107 in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 03-07-2012, 01:18 PM -
Mill conversion to cnc
By wolsey in forum General DiscussionReplies: 1Last Post: 15-08-2011, 11:07 PM
Bookmarks