. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    I think that water in the tube could be extremely dangerous, either from the electrical aspect or the risk of the water boiling and developing a high (explosive) pressure in the tube. Please do not power the machine up like this. G.

  2. The Following User Says Thank You to GEOFFREY For This Useful Post:


  3. #2
    Quote Originally Posted by GEOFFREY View Post
    I think that water in the tube could be extremely dangerous, either from the electrical aspect or the risk of the water boiling and developing a high (explosive) pressure in the tube. Please do not power the machine up like this. G.
    the 1st part was correct in this case ... the outlet water hose arced through the hose where is was near one of the tube mounting bolts .. so yes .. the water was at 25Kv !

    All switched off and waiting for new tube now :)

    And I'll have to fix the pin hole in the hose now too !

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Can I use a 40w PSU with a 50w tube ?
    By Want2build1 in forum Laser Machines & Building
    Replies: 8
    Last Post: 29-07-2014, 09:20 PM
  2. Help with some tube please
    By Fivetide in forum Marketplace Discussion
    Replies: 1
    Last Post: 24-05-2014, 12:54 PM
  3. Do you need to water cool erhm a water cooled spindle?!!
    By HankMcSpank in forum Generic Chinese Spindles
    Replies: 18
    Last Post: 02-10-2013, 09:59 PM
  4. Replies: 17
    Last Post: 18-09-2013, 06:32 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •