Redesign...Steel is now Extrusion

[FlyHighRC]

Hey guys

Having gone back to the drawing board I looked at what materials my future machine would be cutting and id say less than 10% of the use of the machine would be for ali work(Machine will predominately be used for plastics, wax, Woods and foams)... So with that in mind I redesigned a machine with a slightly increased budget, and that can be made without any welding :D

I have seen numerous amounts of people all over the internet with similar designs though only a few with 16mm aluminium plate at the ends of the Y axis. Seems that most extrusion orientated machines are nearly all extrusion.

Anyway...let me know what you think...Be aware i have yet to add the cross bracing :)