you have the connections to the breakout board wrong.
link the negative together and then connect to the N.
Then connect the positive side to the S and the D.
Quote Originally Posted by Skydeals View Post
Hi
Ive just set up my cnc electronics for now with only wiring for x axis.
Im using the ZP5a int BOB from zapp automation.
When powered the PSU is fine, driver green LEDs are on, the motor sounds energized (based on noise coming from it) and when I run something on MACH 3 the x axis lights on the BOB flash.
However there is no movement of the motor. I cant seem to work out why this is?
Any help would be appreciated. The picture of my wiring is attached.