Hybrid View
-
23-07-2014 #1
For those who've seen them in the flesh when new, what is a realistic amount of backlash for the trapezoidal version?
I'm not wanting to machine with one, but I'm needing to probe some parts reasonably urgently, and grabbing one of these looks like the best short term option, and I can put decent ballscrews on it later.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
23-07-2014 #2
Hard to quantify, but a delrin nut on 12x3 trap threaded rod, using a tap made from a offcut of rod, was about 0.05mm when new, and 0.08mm after 3 months or so. Its good enough for 3D printing, and you can avoid backlash altogether by always scanning in the same direction.
-
24-07-2014 #3
I could probably live with 0.05mm.
It would be ideal if more ballscrew ones arrived in stock before the end of the month, as they're all currently priced £1k above what they've previously been selling at :-/
I've already got a decent controller ordered, along with a touch probe, I just need a machine to connect them to!Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
New 6040 owner looking for advice from others with a chinese 6040/3040
By itsmillertime in forum Machine DiscussionReplies: 12Last Post: 14-10-2019, 08:30 AM -
Yet another Chinese 3020 CNC upgrade thread!
By Pointy in forum Machine DiscussionReplies: 31Last Post: 18-02-2014, 01:04 PM -
My first bits of work from a chinese 3020 cnc
By Jester in forum Woodworking Project ShowcaseReplies: 11Last Post: 02-02-2014, 12:08 PM -
WANTED: Has anyone got a Cnc for sale or a cnc 3020 or Cnc 3040 for sale
By RsvRcarl in forum Items WantedReplies: 6Last Post: 25-02-2013, 07:00 AM -
3040 size router plans?
By m_c in forum Gantry/Router Machines & BuildingReplies: 1Last Post: 24-06-2012, 04:15 PM
Bookmarks