Quote Originally Posted by thorphar View Post
I have found the em806 driver on zapp but cant find the am882 does this really effect the end result. Sorry for my idiocy 1610 and 1605 aren't those leadscrews, so why say forget? If they are and you suggest using these do you have a good supplier for leadscrews and nuts, in the uk or really cheap from anywhere else, it just seems that zapp nuts are far too expensive, i was thinking of making them myself ?
Oh here is a picture of the router so far (https://drive.google.com/file/d/0B6v...it?usp=sharing).

Wait a minute

No offence but your design will fly to pieces on the first error when something hits something. By the look of it you can expect speeds in the range of 10 IPM with depth of cut no more than 1mm.


Lets start from the beginning.

So lets start from scratch with the help.

What is your budget? What you expect to do exactly with the machine?